Mercury 2000 Mystique Owner'S Manual Download Page 47

Page: 47 / 248

Controls and features

Rewind/fast forward in CD
mode

• Press the control for less than
three seconds for slow rewind.

• Press the control for more than
three seconds for fast rewind.

• Press the control for less than
three seconds for slow forward
action.

• Press the control for more than
three seconds for fast forward
action.

Tape direction select

Press both

and

to play

the alternate side of a tape.

Rewind/fast forward function in
tape mode

• Press

to rewind the tape.

Play will continue once the
beginning of the tape is reached or
rewind is stopped.

• Press

to fast forward the

tape. Once the end of the tape is
reached, tape direction reverses
and the opposite side of the tape
plays.

Tape eject

Press the control to stop and eject
a tape.

13MCfen 24.6.99 15:06 Uhr Seite 47

Summary of Contents for 2000 Mystique

























































































































































































































































Search results

Summary of Contents for 2000 Mystique

Reviews:

Related manuals for 2000 Mystique

Brands by name

Popular brands

Mercury 2000 Mystique, Owner'S Manual

Search results

Summary of Contents for 2000 Mystique

Reviews:

Related manuals for 2000 Mystique

Brands by name

Popular brands