i
EPA Emissions Regulations
Jet Drives manufactured by Mercury Marine in the United
States are certified to the United States Environmental
Protection Agency as conforming to the requirements of the
regulations for the control of air pollution from new Jet Drive
motors. This certification is contingent on certain adjustments
being set to factory standards. For this reason, the factory
procedure for servicing the product must be strictly followed
and, wherever practicable, returned to the original intent of the
design. Maintenance, replacement, or repair of the emission
control devices and systems may be performed by any marine
engine repair establishment or individual.
Engines are labeled with an Emission Control Information
decal as permanent evidence of EPA certification.
!
WARNING
The engine exhaust from this product contains chemicals
known to the state of California to cause cancer, birth defects
or other reproductive harm.
Warranty Message
The product you have purchased comes with a
limited
warranty
from Mercury Marine, the terms of the warranty are
set forth in the Warranty Information section of this manual.
The warranty statement contains a description of what is
covered, what is not covered, the duration of coverage, how
to best obtain warranty coverage,
important disclaimers and
limitations of damages,
and other related information.
Please review this important information.
The description and specifications contained herein were in
effect at the time this manual was approved for printing.
Mercury Marine, whose policy is one of continued
improvement, reserves the right to discontinue models at any
time, to change specifications, designs, methods, or
procedures without notice and without incurring obligation.
Mercury Marine, Fond du Lac, Wisconsin U.S.A.
Litho in U.S.A.
© 2010 Mercury Marine
200 SportJet
90-10271090 710
