FEATURES AND CONTROLS
68
eng
Engine auto synchronization will automatically engage when
engine speed is over 900 RPM for two seconds and remote
control handles are positioned within 10% of each other. The
"SYNC" light will turn on when the engines are synchronized.
Auto synchronization will stay engaged up to 95% throttle
opening. To disengage, move one or both control handles until
they are more than 10% apart, reduce engine speed below 900
RPM, or increase engine speed beyond 95%.
22969
ACTIVE
SYNC
STAT ION SELECT
THROTTLE
ONLY
HELM TRANSFER
!
WARNING
Avoid serious injury or death from loss of boat control. The
boat operator should never leave the active station while
engine is in gear. Helm transfer should only be attempted while
both stations are manned. One‑person helm transfer should
only be performed while engine is in neutral.
NOTE: Idle position is preferred when doing a helm transfer. If
conditions do not allow the remote control to be placed at idle
position, a helm transfer can be done while in gear.
NOTE: The active light on the remote control will be illuminated
at the helm that is in control of the engine.
The helm transfer function allows the boat operator to select
which helm is in control of engine operation. Pressing the throttle
only/station select button two times allows engine control to be
transferred to a new helm. When a helm transfer is initiated, the
control will automatically start adjusting engine RPM and gear
position to match the control handle setting at the new helm.
Adjust the control handles to the desired throttle and gear
position.
Summary of Contents for 200 OptiMax DTS
Page 6: ...vi eng ...
Page 12: ...xii eng ...
