Mercury 200 OptiMax DTS Manual Download Page 77

Page: 77 / 157

FEATURES AND CONTROLS

eng

Dual Handle Console Control Features and

Operation

1. Operation of shift and throttle is controlled by the movement

of the control handle. Push the control handle forward from

neutral to the first detent for forward gear. Continue pushing

forward to increase speed. Pull the control handle back from

neutral to the first detent for reverse gear. Continue pulling

back to increase speed.

3417

2. Trim switch (if equipped) ‑ Pressing the trim switch allows

the engine to trim up or down.

5269

3. Control handle tension adjustment screw ‑ This screw can

be adjusted to increase or decrease the tension on the

control handle (cover must be removed). This will help

prevent unwanted motion of the handle in rough water. Turn

the screw clockwise to increase tension and

counterclockwise to decrease tension. Adjust to the desired

tension.

Summary of Contents for 200 OptiMax DTS






























































































































































Search results

Summary of Contents for 200 OptiMax DTS

Reviews:

Related manuals for 200 OptiMax DTS

Brands by name

Popular brands

Mercury 200 OptiMax DTS, Manual

Search results

Summary of Contents for 200 OptiMax DTS

Reviews:

Related manuals for 200 OptiMax DTS

Brands by name

Popular brands