MAINTENANCE
SECTION 5
Page 59
CMD-4081877 / 90-865861040 MARCH 2004
0065
Changing Oil and Filter
Refer to the Maintenance schedule for the change interval. Engine oil should be changed
before placing the boat in storage.
IMPORTANT: Change engine oil when the engine is warm from operation. Warm oil
flows more freely, carrying away more impurities. Use only recommended engine oil
(refer to Specifications).
00000 was CD940
1. Start engine and allow it to warm up to normal operating temperature.
2. Stop engine and allow some time for oil to drain into oil pan (approximately 5 minutes).
3. Remove fitting from end of crankcase oil drain hose laying on top of engine.
4. Install crankcase oil pump (order separately) onto threaded fitting of oil drain hose.
79935
a
b
70571
a
b
c
Typical engine and oil drain hose, all similar
a -
Threaded fitting
b -
Oil drain hose
c -
Crankcase oil pump (802889Q1, or equivalent)
5. Pump oil out of crankcase into drain pan.
6. When crankcase is empty, remove pump and install crankcase oil drain hose fitting.
Tighten securely.
7. Install the oil dipstick.
Summary of Contents for 2.8 EI 200
