STORAGE AND RECOMMISSIONING
SECTION 6
Page 93
CMD-4081877 / 90-865861040 MARCH 2004
7. Remove the temporary hose from the seawater pump.
CAUTION
If boat is in the water, seacock must remain closed until engine is to be re-started
to prevent water from flowing back into cooling system, boat, or both. If the boat
is not fitted with a seacock, the water inlet hose must remain disconnected and
plugged to prevent water from flowing back into the cooling system, boat, or both.
8. Clean the outside of the engine and repaint any areas required with Primer and Spray
Paint. After the paint has dried, coat the engine with specified corrosion inhibiting oil or
equivalent.
Description
Where Used
Part Number
Corrosion Guard
92-802878-55
Light gray primer
Outside of engine
92-802878-52
Phantom Black paint
g
92-802878-1
9. Your Cummins MerCruiser Diesel dealer / distributor should now perform all checks,
inspections, lubrication and fluid changes outlined in
Section 5 - Maintenance
Schedules.
10. Follow the battery manufacturer’s instructions for storage and store the battery.
Extended Storage Instructions
IMPORTANT: Cummins MerCruiser Diesel strongly recommends that this service
should be performed by an authorized Cummins MerCruiser Diesel dealer /
distributor.
1. Read all precautions and perform all procedures found in Preparing Your Power
Package For Seasonal Or Extended Storage.
2. Read all precautions and perform all procedures found in
Section 5 - Draining The
Seawater System
and drain the seawater section of the cooling system.
3. Read all precautions and perform all procedures found in Seasonal Storage
Instructions.
IMPORTANT: The seawater pump impeller material can be damaged by prolonged
exposure to direct sunlight.
4. Remove the seawater pump impeller and store away from direct sunlight. Refer to an
authorized Cummins MerCruiser Diesel dealer / distributor for additional information
and service.
5. Place a CAUTION TAG at instrument panel and in engine compartment stating that the
seawater pump impeller has been removed and to not operate the engine.
Summary of Contents for 2.8 EI 200
