Tighten the center bolt of the right-hand engine support insulator.
All Vehicles
28.
NOTE: Verify that the center bolt is centered in the support insulator.
Tighten the center bolt of the left-hand engine support insulator.
29.
Install the lower part of the engine front cover.
30.
NOTE: Use the access hole in the bottom of transaxle case to stop engine rotating.
Install the crankshaft pulley/vibration damper.
31.
NOTE: Note the accessory drive belt direction mark if belt is to be reused.
Install the accessory drive belt.
1.
Install the belt idler pulley.
2.
Install the water pump pulley.
3.
Tension the belt tensioner clockwise and position the accessory drive belt in place.
4.
Tighten the water pump pulley bolts.
32.
Install the right-hand front lower splash shield.
Install the right-hand front wheel.
33.
Install the engine undershield (if equipped).
Page 9 of 10
1999 Cougar Workshop Manual
12/1/2009
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXU/~MUS~LEN/21/...
