15.
CAUTION: Use a block of wood between the oil pan and the floor jack.
Position the floor jack under the oil pan and raise slightly to release the pressure on the front insulator.
16.
NOTE: Mark the mounting position.
Remove the engine front support insulator.
17.
Detach the power steering pipe bracket from the engine lift eye.
18.
Remove the bolts.
Leave the timing belt cover in its installed position.
19.
Remove the center part of the engine front cover/front engine mounting bracket.
Take off the upper and the center covers.
20.
Unclip the throttle cable and the speed control cable from the cylinder head appearance cover.
21.
Remove the appearance cover.
1.
Disconnect the solenoid valve electrical connector.
2.
Remove the appearance cover.
22.
NOTE: Loosening sequence: From the outside inwards, working diagonally.
Remove the valve cover.
Page 3 of 10
1999 Cougar Workshop Manual
12/1/2009
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXU/~MUS~LEN/21/...
