MerCruiser 8.1 MAG Owner'S Manual Download Page 20 | Manualshive

Page: 20 / 152

background image

Section 1 - Warranty

Page 12

90-864839070 AUGUST 2007

Mercury MerCruiser products installed by a Mercury Installation Quality Certified

Manufacturer are Installation Quality certified products and may receive an additional one

(1) year of limited warranty coverage.
The Installation Quality Certification program was developed to recognize MerCruiser

boatbuilder customers who have achieved higher manufacturing standards. It is the first

and only comprehensive manufacturer‑installation certification program in the industry.
The program has three goals:
1. To enhance overall product quality.
2. To improve the boat ownership experience.
3. To enhance overall customer satisfaction.
The certification process is designed to review all facets of manufacturing and engine

installation. The program is composed of design, manufacturing and installation review

stages with which builders must comply. Certification applies leading‑edge methodologies

to create:
• Efficiencies and best practices specific to engine installation.
• World‑class assembly and component specifications.
• Efficient installation processes.
• Industry standard end‑of‑line test procedures
Boat builders that successfully complete the program and meet all certification

requirements earn Installation Quality System Certified Manufacturer status and receive

an additional one (1) year of Mercury limited factory warranty coverage on all

MerCruiser‑powered boats that are registered on and after the boat builder's certification

date for all worldwide registrations.
Mercury has designated a section of our Website to promote the Installation Quality

Certification Program and communicate its benefits to consumers. For a current list of

MerCruiser‑powered boat brands that have earned Installation Quality Certification, visit

www.mercurymarine.com/mercruiser_warranty.

Emission Control Information Label

A tamper‑resistant Emission Control Information label is affixed in a visible location to the

engine at time of manufacture by Mercury MerCruiser. In addition to the required emissions

statement, the label lists the engine serial number, family, FEL (emission level), date of

manufacture (month, year), and the engine displacement. Please note that the low

emissions certification will not affect the fit, function, or performance of the engines.

Boatbuilders and dealers may not remove the label or the part it is affixed to before sale.

If modifications are necessary, contact Mercury MerCruiser about the availability of

replacement decals before proceeding.

EMISSION CONTROL
INFORMATION

THIS ENGINE CONFORMS TO 2003 CALIFORNIA EMISSION
REGULATIONS FOR SPARK IGNITION MARINE ENGINES
REFER TO OWNER'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS
SERIAL# OMXXXXXXXX
FAMILY XXXXX_XXXXXX
FEL. XX.X g/kW-hr

D.O.M. JAN. 2003
DISP X.XL

11018

Emission Control Label ‑ Non CE Marked

«
...
18
19
20
21
22
...
»

Summary of Contents for 8.1 MAG

























































































































































Reviews:

No comments

Related manuals for 8.1 MAG

Brand: Daihatsu Pages: 294

Brand: hager Pages: 4

Brand: SOMFY Pages: 2

Brand: Farymann Diesel Pages: 76

Brand: RHINO Pages: 20

Brand: Himax Pages: 2

Dexxo Pro 1000 RTS

Brand: SOMFY Pages: 13

Elixo 500 230 V

Brand: SOMFY Pages: 44

Elixo 500 230 V

Brand: SOMFY Pages: 48

Brand: Nice Pages: 21

Era-Era Zero E LH

Brand: Nice Pages: 32

RolloTube S-line Sun DuoFern

Brand: RADEMACHER Pages: 2

Brand: YS Pages: 2

Brand: YS Pages: 2

Brand: YS Pages: 2

Brand: MULTIPLEX modell Pages: 6

Brand: Honda Pages: 31

Brand: WilTec Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands