MerCruiser 6.2 MPI User Manual Download Page 6

Page: 6 / 110

Page ii

90-864197072 NOVEMBER 2007

Passenger Safety in Pontoon Boats and Deck

Boats.................................................................... 38

Boats Having An Open Front Deck..................38

Boats With Front‑Mounted, Raised Pedestal

Fishing Seats...................................................38

Wave and Wake Jumping.................................... 39

Impact with Underwater Hazards......................... 39

Conditions Affecting Operation.............................40

Weight Distribution (Passengers and Gear)

Inside the Boat.............................................. 40

The Bottom of the Boat................................. 40

Cavitation...................................................... 40

Ventilation..................................................... 41

Elevation and Climate................................... 41

Getting Started..................................................... 41

20‑Hour Break‑In Period............................... 41

After Break‑In Period.....................................41

End of First Season Checkup....................... 42

Section 4 - Specifications

Cruising RPM....................................................... 44

Fuel Requirements...............................................44

Fuel Ratings.....................................................44

Using Reformulated (Oxygenated) Gasolines

(USA Only).......................................................44

Gasolines Containing Alcohol..........................44

Engine Oil.............................................................45

Engine Specifications...........................................46

Fluid Specifications.............................................. 46

Engine..............................................................46

Transmission................................................... 47

Section 5 - Maintenance

Owner/Operator Responsibilities..........................50

Dealer Responsibilities.........................................50

Maintenance.........................................................50

Do‑It‑Yourself Maintenance Suggestions.............51

Inspection.............................................................51

Maintenance Schedule—Inboard Models............ 52

Routine Maintenance.................................... 52

Scheduled Maintenance................................52

Maintenance Log..................................................53

Engine Oil.............................................................53

Checking..........................................................53

Filling............................................................... 54

Changing Oil and Filter....................................55

Easy Engine Oil Drain System....................55

Engine Oil Drain Pump............................... 55

Changing Filter............................................56

Transmission Fluid............................................... 57

Checking While the Engine is Warm............... 57

Checking While Engine is Cold........................57

Changing......................................................... 57

Engine Coolant.....................................................57

Checking..........................................................57

Filling............................................................... 58

Changing ........................................................ 59

Cleaning the Flame Arrestor................................ 59

Positive Crankcase Ventilation Valve (PCV)... 60

Changing.....................................................60

Water‑Separating Fuel Filter................................ 61

GEN III Models..............................................62

Removal......................................................62

Installation...................................................63

Lubrication............................................................63

Throttle Cable................................................63

Transmission Linkage................................... 64

Serpentine Drive Belt........................................... 65

Checking..........................................................65

Replacing Belt and/or Adjusting Tension.........65

Flushing The Power Package.............................. 66

Horizon Models................................................66

The Boat Out of the Water...............................67

The Boat In the Water......................................69

Battery..................................................................71

Multiple EFI Engine Battery Precautions.......72

Section 6 - Storage

Cold Weather or Extended Storage..................... 74

Preparing Power Package for Storage..........74

Engine and Fuel System Preparation......... 75

Draining the Seawater System.............................76

Summary of Contents for 6.2 MPI















































































































Search results

Summary of Contents for 6.2 MPI

Reviews:

Related manuals for 6.2 MPI

Brands by name

Popular brands

MerCruiser 6.2 MPI, User Manual

Search results

Summary of Contents for 6.2 MPI

Reviews:

Related manuals for 6.2 MPI

Brands by name

Popular brands