MerCruiser 6.2 MPI User Manual Download Page 26

Page: 26 / 110

Section 2 - Getting to Know Your Power Package

Page 18

90-864197072 NOVEMBER 2007

CONSOLE MOUNT FEATURES

17356

a -

Throttle Only Button

b -

Control Handle

Throttle Only Button -

Allows engine throttle advancement without shifting the engine.

This is done by disengaging the shift mechanism from the control handle. The throttle only

button can be depressed only when the remote control handle is in the neutral position.

Control Handles -

Operation of the the shift and throttle are controlled by the movement

of the control handle. Push the control handle forward from neutral with a quick firm motion

to the first detent for forward gear and continue pushing forward to increase speed. Pull

the control handle back from neutral with a quick firm motion to the first detent for reverse

gear and continue pushing back to increase speed.

Control Handle Tension Adjustment Screw - (not visible)

This screw is used to adjust

the effort required to move the remote control handle. Refer to instructions provided with

remote control for complete adjustment instructions.

Zero Effort Features

17357

a -

Shift ever

b -

Throttle lever

Shift Lever -

Shift functions are controlled by the movement of the shift lever. Shift into

reverse by moving the shift lever to its aft position. Shift into neutral by moving the shift

lever to its center position. Shift into forward by moving the shift lever to its forward position.

Summary of Contents for 6.2 MPI















































































































Search results

Summary of Contents for 6.2 MPI

Reviews:

Related manuals for 6.2 MPI

Brands by name

Popular brands

MerCruiser 6.2 MPI, User Manual

Search results

Summary of Contents for 6.2 MPI

Reviews:

Related manuals for 6.2 MPI

Brands by name

Popular brands