background image

mcr PL1 

 overpressure-bleed damper                                                            

MERCOR SA – 

The Company reserves the right to make modifications and changes.

 

9/9 

 
 

9. TERMS OF GUARANTEE ___________________________________________  

 
 
1.  The  Manufacturer  provides  a  guarantee  for  the  delivered  product  for  12  months  from  the  date  of 

issuing the invoice, unless the guarantee period is specified in a separate contract. 

2.  Any faults revealed during the guarantee period, which prevent correct operation of the product, shall 

be  rectified  within  21  days  from  the  date  of  reporting,  unless  the  time  for  rectifying  the  faults  is 
specified in a separate contract. 

3.  The guarantee is extended by the period from reporting the fault to finishing the guarantee repair. 
4.  If  any  faults  preventing  further  correct  operation  of  the  product  are  found  in  the  product,  the 

Manufacturer  shall  replace  the  faulty  product  with  a  product  of  full  value  with  no  financial 
consequences to the purchaser. 

5.  The  guarantee  does  not  include  the  operations  performed  by  the  purchaser/user,  specified  in  the 

Documentation. 

6.  The Manufacturer is absolved from the guarantee and any obligations resulting from the guarantee if: 

a)  the product has mechanical damage created due to: 

- improper transport or unloading using own means of the purchaser 
- improper installation using own forces of the purchaser  
- improper operating of the product 

b)  faults arise in result of improper storage of the product 
c)  the purchaser/user has introduced structural modifications on their own  
d)  installation of the product has been performed by the purchaser on their own, not in accordance 

with the Documentation 

e)  faults arise in result of maintenance of the product not in accordance with the Documentation  
f)  a rating plate of the product is removed 

7.  In the complaint procedure for the product, the Manufacturer deducts the equivalent of the elements 

missing or damaged through the purchaser's/user's fault and the cost of their replacement. 

 

Summary of Contents for mcr PL1










Reviews: