3
/
19
CAUTION
All previous issues of this Technical Manual expire on the date of issue hereof.
This Technical Manual does not apply to any fans manufactured prior to this Manual's date of
issue.
1. FOREWORD__________________________________________________
This Technical Manual is addressed to users/operators of type mcr Monsun smoke exhaust axial fans.
This document is intended to provide guidelines on the application, design, commissioning and operation
of the product.
Read this Technical Manual thoroughly before installing this equipment at its operating
site and commissioning.
If the equipment is found malfunctioning or defective, contact the manufacturer or their
Authorised Representative.
Due to the continuous product improvement policy, we reserve the right to change the
product design in order to improve its performance and safety.
The design of the ventilators complies with the essential requirements of PN-EN 12101-3:2004 for smoke
exhaust fans. The design also meets the state of the art in technology, while assuring health and safety
protection.
This equipment has been designed and manufactured according to the following standards:
PN-EN 12101-3:2004
Smoke and heat control systems.
Part 3: Specification for powered smoke and heat exhaust fans.
PN-EN ISO 12100-1:2005
Safety of machinery. Basic concepts, general principles for design.
Part 1: Basic terminology, methodology.
PN-EN ISO 12100-2:2005
Safety of machinery. Basic concepts, general principles for design.
Part 2: Technical principles.
PN-EN 60204-1:2001
Safety of machinery. Electrical equipment of machines.
Part 1: General requirements.
The smoke exhaust fan design also meets the state of the art in technology, while assuring health and
safety protection.
2. MANUFACTURER'S
DISCLAIMER____________________________________
The manufacturer shall not be liable for any consequences of non-intended use or misuse of the
equipment.
DO NOT install any components that are not included in the equipment composition or accessories.
Unauthorised modifications or alteration of this equipment is strictly prohibited.
Protect the equipment enclosure (casing) from mechanical damage.
Before attempting to install this equipment, verify the load bearing capacity of the structural
elements to which the equipment is to be fastened. Unreliable fastening may result in damage or
