17
/
19
9. SAFETY MANUAL________________________________________________
Read and understand this Technical Manual before commissioning and servicing the product.
The smoke exhaust fan is not hazardous when firmly attached to a ventilation system and the ventilator
support structure.
Make the electrical connections according to the enclosed electrical wiring diagram and the guidelines in
Section 7.3. Electrical connections shall be made by personnel with relevant qualifications which have
been certified as required by current laws.
Inspect the PE wire connection of the smoke exhaust ventilator during the operating life.
Disconnect the smoke exhaust fan from electrical power before any inspections or checks.
CAUTION:
1. Do not clean smoke exhaust fans of deposits with pressure or steam washers.
2. Loss of seal at the fan connections or flexible ends may result in hazards due to
release of the forced medium and requires immediate replacement of leaking components.
If the equipment is malfunctioning (e.g. excessive noise, vibration and/or erratic operation is found),
disconnect the fan from electrical power supply, and call the manufacturer's technical service or an
inspection and repair contractor authorised by the manufacturer.
10. MAINTENANCE & SERVICING____________________________________
The equipment from “Mercor” SA require periodic technical inspection and maintenance at least every 12
months throughout its operating life, i.e. during the warranty and post-warranty period. Inspection and
maintenance may only be carried out by the manufacturer or contractors authorised by “Mercor” SA to
service its products.
Regular service inspections of fire protection equipment is mandatory in Poland according to § 3 Section
3 of the Polish Regulation of the Ministry of the Interior and Administration of 7 June 2010 on the fire
protection of buildings, other structures and areas (Polish Journal of Laws, Year 2010, No. 109 Item 719).
Do these recommended actions in the inspection intervals:
Check the electrical connections, especially for all mechanical damage.
Check the equipment casing, especially for all mechanical damage.
Check for any obstructions to proper performance of the equipment.
To facilitate the activities under service inspection, servicing and warranty claim response, e.g. visual
inspection or repairs, the equipment user/operator shall provide physical access to the equipment by
removing thermal insulation, suspended ceiling, and other installations, as required and applicable to
warrant unobstructed access.
In the case of roof mounted equipment, provide access to the area (via ladders or elevated platforms).
If the equipment is only operated for smoke exhaust during fire, test run it for ca. 10 minutes every 3
months.
Refer all matters related to technical inspection, maintenance and servicing of this equipment to the
“Mercor” SA Service Department, [email protected], tel. +48 58 341 42 45 ext. 170, fax: +48 58 341
39 85, from 8 AM to 4 PM (Mo-Fri).
11. WARRANTY TERMS & CONDITIONS
_________________________
1. “MERCOR” SA grants 12 months of warranty for the equipment quality from the date of purchase,
unless the sales contract states otherwise.
2. Submit each warranty claim to “MERCOR” SA in 7 days from the date of discovery of a warranty
eligible defect
3. Submit warranty claims by calling at: tel. +48 58 341 42 45, by fax: +48 58 341 39 85, by e-mail:
[email protected] or by traditional mail: “MERCOR” SA, ul. Grzegorza z Sanoka 2, 80-408
Gdańsk, Poland.
4. If physical defects of equipment are found during the warranty period, “MERCOR” SA warrants and
represents to remove them in shortest possible time from serving the written warranty claim with the
proof of purchase or sales contract, subject to Item 10.
