Merco TS2 Series Installation And Operation Manual Download

Page: 15 / 16

OPTIONS AND ACCESSORIES

Form No. TS2M-0210

4″ (102 mm) Adjustable Legs (TS2 Models)

Use the following procedure to install 4″ adjustable legs on a

TS2 model.

NOTE: 4″ (102 mm) legs are standard on models 42″

(1067 mm) and wider.

1. Turn off the unit, unplug the power cord, and allow the unit

to cool.

Do not lay unit on the side with the control panel. Damage

to unit could occur.

2. Carefully turn the unit upside down and lay the unit on a flat

surface. Make sure to cover the surface with something to

prevent scratching the unit.

3. At each corner, thread a 4″ leg into the bottom of the unit.

Hand-tighten until snug. Do not over-tighten.

4. Return the unit to the upright position.

NOTICE

Figure 14. Leg Installation

NOTE: The feet on the 4″ legs are adjustable for leveling the

unit. Use a 9/16″ (14 mm) open-end wrench to make

leveling adjustments once the unit is placed in its final

position.

4″ (102 mm)

Leg

Lengthen

Shorten

Adjustable Foot

Summary of Contents for TS2 Series
















Search results

Summary of Contents for TS2 Series

Reviews:

Related manuals for TS2 Series

Brands by name

Popular brands

Merco TS2 Series, Installation And Operation Manual

Search results

Summary of Contents for TS2 Series

Reviews:

Related manuals for TS2 Series

Brands by name

Popular brands