Merco TS2 Series Installation And Operation Manual Download

Page: 12 / 16

OPERATION

Form No. TS2M-0210

General

Use the following procedure to turn on and operate the TS2

and TS2-B units.

Read all safety messages in the IMPORTANT SAFETY

INFORMATION section before operating this equipment.

1. Plug unit into a properly grounded electrical receptacle of

the correct voltage, size, and plug configuration. Refer to

the SPECIFICATIONS section in this manual for details.

2. Move the POWER On/Off (I/O) switch to the On (I) position.

BURN HAZARD: Some exterior surfaces on unit will get

hot. Use caution when touching these areas.

3. Turn the thermostat control to the desired temperature

setting.

4. Allow the unit 30 minutes to reach operating temperature.

WARNING

CAUTION

Thermostat

Control

Power On/Off

Switch

Figure 12. Control Panel — TS2 Model

Thermostat

Control

POWER On/Off (I/O)

Switch

Figure 13. Control Panel — TS2-B Models

Summary of Contents for TS2 Series
















Search results

Summary of Contents for TS2 Series

Reviews:

Related manuals for TS2 Series

Brands by name

Popular brands

Merco TS2 Series, Installation And Operation Manual

Search results

Summary of Contents for TS2 Series

Reviews:

Related manuals for TS2 Series

Brands by name

Popular brands