4-2
Part Number: MER_IOM_8197455
Maintenance
Section 4
INTERIOR CLEANING
,
Caution
Do not use caustic cleaners on any part of the holding
cabinet or holding cabinet cavity . Use mild, non abrasive
soaps or detergents, applied with a sponge or soft cloth.
Never use sharp implements or harsh abrasives on any
part of the holding cabinet.
The product tray, RFID band, RFID collar, RFID carrier, lid,
false bottom and tray seal may be cleaned via dishwasher
or with warm soapy water. Care must be taken to prevent
water or cleaning compounds from getting on internal
parts, especially the switches on the control panel.
PLASTIC TRAY CLEANING
,
Caution
Environmental stress cracking can occur, proper dilution
and rinsing per detergent manufacturers’ directions are
mandatory.
Food-approved detergents can be used if they are diluted
per manufacturers’ directions and adequately rinsed
away prior to high temp drying cycle. Basic alcohols such
as isopropyl are acceptable for hard-to-remove stains.
Otherwise, do not use organic solvents.
DAILY CLEANING INSTRUCTIONS
1. You will need a damp cloth and hot soapy water.
2. Turn the unit off.
3. Unplug the unit.
4. Allow unit to cool for approximately 30 minutes. If it is
necessary to continue before it has completely cooled
wear heat resistant gloves.
5. Remove the trays. Remove RFID band, RFID collar and
RFID carrier,from each tray.
