Please retain product label and instructions for future reference
Please retain product label and instructions for future reference
Step 1
Parts needed - & &
To fix the Window
(No. 19)
into
the Door Gable
(No. 1)
. Position the
Window (
No. 8
) central into the
window opening. Fix the Window
Block (
No. 20
) to the Window centrally
as shown with 1x30mm screw.
Place the Window
(No. 8)
into
the window hole and fix by screwing
though the Window Block (
No. 20
)
with 2x30mm screws as shown.
6x30mm screws.
30mm
screw
1
8
A
B
A
B
19
8
A
20
1!
2!
Pre drill
hole
20
Step 2
Parts needed - & &
Lay the Floor Joists
(No. 9)
under the
Floor OSB
(No. 6)
with an even space
between each one.
Position the joists
(No. 9)
flush on one
side of the Floor OSB
(No. 6)
and mark
the centers of joists onto either end.
Fix using 4 x 30mm screws per joist
(No. 7).
Place the Veranda Boards
(No. 10)
along the joists and against the floor
OSB
(No. 6)
. Spread them evenly
making sure the end board is flush
with the framing. Fix using 2 x 30mm
screws for each board along the
dotted lines shown on the illustration.
50x30mm screws
30mm
screw
6
10
9
6
10
9
1!
2!
Pre drill
hole
Step 3
Parts needed - &
Position the Plain Gable
(No. 4)
and
Plain Side Left (
No. 2
) so there is equal
spacing between the floor and
cladding on all 4 sides.
Fix the corners with 50mm screws as
shown in diagram.
Do not secure the building to the
floor until the roof is fitted.
3x50mm screws
50mm
screw
2
4
1!
2!
Pre drill
hole
2
4
Step 4
Parts needed - &
Attach the Plain Side Right (
No. 3
) and
Door Gable
(No. 1)
using the same
method as shown previously.
Fix with 3x50mm screws at each
corner.
9x50mm screw
3
1
50mm
screw
1
3
1!
2!
Pre drill
hole
a
a
a
a
a
a
a
a
a
a
a
If you have purchased a tower please
refer to the tower instructions. The
floor bearers are not required when
installing a tower.
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
www.merciagardenproducts.co.uk P5
