Sla
ve D
oor
Lock
ing D
oor
Step 20
Fix the turn buttons into
place at the top and
bottom of door as shown in
the diagram.
The turn buttons help to
keep the doors alligned
during high and low levels
of moisture.
2x16mm Black Screws
20
Pre drill
hole
16mm
screw
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
22
Step 18
Fix the presslock to the inside of the
master door, making sure to align the
barrel and the key hole.
Secure to the master door with
4x16mm screws.
*Ensure the key turns fully without
any restrictions.
4x16mm Screws
Pre drill
hole
16mm
screw
Step 19
Attach to the barrel bolts to
the top and bottom of the
slave door using 4x10mm
screws per bolt.
*Mark the position of the bolt
with a pencil on the framing
and drill a hole to site the
bolts.
8x10mm Screws
21
Please retain product label and instructions for future reference
Pre drill
hole
10mm
screw
