Pre drill
hole
50mm
screw
P 3
Please retain product label and instructions for future reference
Step 3
Place the plain gable and the first plain
side onto the floor.
Fix the corners with 50mm screws
as shown in the illustration,
making sure the gable sits inside
the panel.
Do not secure the building to the
floor until the roof is fitted.
3x50mm Screws
3
2
1
2
Pre drill
hole
50mm
screw
Step 4
Place the door gable and the second plain
side onto the floor.
Fix the corners with 50mm screws
as shown in the illustration,
making sure the gable sits inside
the panel.
Do not secure the building to the
floor until the roof is fitted.
9x50mm Screws
10
18
Step 5
Attach the “L” brackets centrally
to the ridge bar using 2x30mm
screws per bracket.
*Measure 67mm from each side
of the ridge bar and mark with
a pencil. Align the front edge of
the bracket with the pencil mark
as shown in the illustration.
4x30mm Screws
Pre drill
hole
30mm
screw
Step 6
Place the assembled ridge bar inbetween
the gables, resting on top of the blocks.
Secure to the gables using 2x30mm
screws per side.
*Adjust the “L” brackets if needed.
4x30mm Screws
Pre drill
hole
30mm
screw
