P 5
Please retain product label and instructions for future reference
14
15
15
Step 11
Fit the angled fascia block to
the apex of the roofs, making
sure it is flush with the roof
sheet, securing in place with
4x40mm screws.
Attach the rectangular blocks
approximately half way along
each roof sheet, fixing into
place with 2x40mm screws
per block.
8x40mm Screws
Pre drill
hole
40mm
screw
Step 12
Place the veranda floor on the
ground flush to the door gable
as shown in the illustration.
*Ensure the veranda floor sits
centrally to the building.
9
9
Step 13
Align the veranda sides against
the door gable and flush to ends
of the veranda floor, secure to
the building and to veranda floor
with 6x50mm screws per side as
shown in the illustration.
12x50mm Screws
Pre drill
hole
50mm
screw
17
17
Step 14
Place the veranda frame underneath
the roof overhang, aligning the frame
flush to edge of the veranda rail.
Secure to the veranda rail and to the
roof using 3x40mm screws per frame.
*Ensure the framing follows the
same direction as the roof.
6x40mm Screws
Pre drill
hole
40mm
screw
8
