P 6
Please retain product label and instructions for future reference
Step 7
(See Pre-Assembly)
Parts needed - No. 7 QTY 12
No. 8 QTY 6
No. 9 QTY 6
No. 10 QTY 12
No. 11 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (
No’s. 7, 8, 9,
10 & 11
) onto the assembly
to create your second level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
**Please Note:
The short boards placed
to create the opening’s for the doors &
windows can be placed either side
depending on your needs.
Step 10
(See Pre-Assembly)
Parts needed - No. 7 QTY 12
No. 8 QTY 6
No. 9 QTY 6
No. 10 QTY 12
No. 11 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards (
No’s. 7,
8, 10, 11 & 12
) onto the
assembly to bring the board
level to the top of the window
and door frames.
*Ensure that the boards are
level and flush with each
other as you lay each one.
4x70mm
10
10
8
7
9
11
Step 8
Following the same method, place the
assembled garage door frame
inbetween the short boards at the
front of the building ensuring the
frame rests on top of the bearers.
Once in place secure the frame to
the log boards, screwing through
the frame into the boards using
10x70mm screws.
10x70mm Screws
Pre drill
hole
70mm
screw
Pre drill
hole
70mm
screw
IMPORTANT:
Pre-drill before fixing screws.
IMPORTANT:
Pre-drill before fixing screws.
Step 9
Once you have laid the second
level of boards onto the assembly
slide the window(
s
)
(No. 1)
between the
smaller boards and rest on to the
longer board.
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may
differ from your choice in product
(
regarding window position
).
Nevertheless the process of fitting
the window is the same.
7
10
10
8
7
9
11
7
IMPORTANT:
Pre-drill before fixing screws.
