P 11
Please retain product label and instructions for future reference
Felt
tacks
Step 21
Parts needed - No. 36
Cut the felt into five strips and lay
onto the roof in the order shown
in the illustration.
*Ensure there is approximately
50mm of overhanging felt each
side.
Once the felt is laid out fix to the
roof using felt tacks at 100mm
intervals.
*Felt size: 5936mm
480x Felt Tacks
Step 20
Parts needed - No. 24 QTY 8
Inside the building place a closure trim
(
No. 24
) against the boarding and align
with the roof as shown in the illustration.
Once in position fix each trim
into place by pre drilling a pilot hole and
using 6x30mm screws per trim, equally
spacing them along the face of the
board.
40x40mm Screws
Pre drill
hole
40mm
screw
*
trim to fit
IMPORTANT:
Pre-drill before fixing screws.
Roof
Closure Trim
Internal
24
*Measure and cut the
closure trims to
fit the internal space.
30mm
screw
HANDLE
WITH CARE
1
2
3
4
1.
2.
3.
4.
5.
30mm
screw
