IMPORTANT: Pre-drill before fixing screws.
Step 8
Once you have laid 6 log boards (
off
of the starter
) up the door section,
slide the assembled door frame (No.
2) assembly over the boards resting
the frame on top of the starter board.
*Please note:
This image is for illustra-
tive purposes and may differ from
your choice in product (
regarding
door position
). Nevertheless the
process of fitting the door frame is
the same.
**Please Note:
The short boards at
the
front of the building (either side of
the door and window opening’s) can
be placed either side depending on
your needs.
Please retain product label and instructions for future reference
***Please Note:
The short boards placed
to create the opening’s for the doors &
windows can be placed either side
depending on your needs.
9
13
14
16
20
10
14
16
20
20
18
13
19
18
Step 7
(See Pre-Assembly)
Parts needed - No. 9 QTY 6
No. 10 QTY 6
No. 13 QTY 6
No. 14 QTY 6
No. 16 QTY 6
No. 20 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (No’s. 9, 10,
13, 14, 16 & 20) onto the
assembly to create your second
level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Step 9
(See Pre-Assembly)
Parts needed - No. 13 QTY 6
No. 14 QTY 6
No. 16 QTY 6
No. 18 QTY 12
No. 19 QTY 12
No. 20 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (No’s. 13, 14,
16, 18, 19 & 20) onto the
assembly to create your second
level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame by 12-13 boards,
refer to door installation
instructions, if not, you can
install the door at step 11.
***Please Note:
The short boards placed
to create the opening’s for the doors &
windows can be placed either side
depending on your needs.
IMPORTANT: Pre-drill before fixing screws.
20
19
P 6
Step 10
Once you have laid the second
level of boards onto the assembly
slide the window(
s
) (No. 1) between the
smaller boards and rest on to the
longer board.
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may
differ from your choice in product
(
regarding window position
).
Nevertheless the process of fitting
the window is the same.
