P 21
Please retain product label and instructions for future reference
Step 33
Parts needed - No. 48 QTY 2
No. 88 QTY 2
Place the finisher boards (
No. 88
) around the back of the log cabin, locating each board flush to the truss’.
*Please Note: there should be a gap between the finisher boards No. 82 & 82 on either side of the log cabin, with
enough space to locate a Roof Truss.
Locate the last two ‘Roof Truss A’
(No. 48)
into the gaps between the finisher boards
No, 88 & 88
on either
side of the log cabin, as shown in the illustration.
Some adjustment may be required to ensure the roof structure rests correctly.
Fix the Roof Truss’
(No.48)
in place by screwing into the purlin at an angle, as shown in the illustration
using 1x90mm screw per Roof Truss.
Secure the Finisher boards
(No.88)
in place by screwing through the board into the Roof Truss using
70mm screws, ensuring to stagger the screws to avoid colliding.
2x90mm Screws
8x70mm Screws
70mm
screw
Pre drill
hole
Please note: You can adjust the
blocks attached to the roof
truss’ if necessary
.
88
88
88
Left Handed
48
48
IMPORTANT:
Pre-drill before fixing screws.
Right Handed
90mm
screw
88
Rubber Mallet
may be required
to fit parts.
88
88
88
88
48
48
Step 34
You can now fix the assembled roof truss’s to the log cabin, making sure the attached blocks sit
inside the assembly.
Some adjustment may be required to ensure the roof structure rests correctly.
Once in position fix the Roof Truss’ to the log cabin using 1x120mm screw per Roof Truss as shown
in the illustration. Ensure to stagger screws to avoid colliding.
16x120mm Screws
Pre drill
hole
120mm
screw
IMPORTANT:
Pre-drill before fixing screws.
Left Handed
Please note: You can adjust the
blocks attached to the roof
truss’ if necessary
.
Right Handed