P 6
For assistance please contact customer care on: 01636 821215
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
Please retain product label and instructions for future reference
35
54
53
60
59
61
Pre drill
hole
70mm
screw
Step 1
The following steps show how to
construct a
3m x 3m corner cabin.
To construct a
5m x 3m cabin, please
refer to the 5m x 3m instructions.
Parts needed - No. 53 QTY 1
No. 54 QTY 1
No. 59 QTY 1
No. 60 QTY 1
No. 61 QTY 1
Lay the bearers (
No. 53, 54, 59, 60 &
61
) onto a firm and level surface
(
free from areas where standing
water can collect
) as shown in the
illustration.
Fix the bearers together at each
corner using 10x70mm screws,
ensuring the frame is flush.
Once fully assembled, ensure the
bearers are square by measuring from
corner to corner, as illustrate, making
sure they are an equal measurement.
If the bearers are not alligned equally,
unscrew and adjust and re-align
accordingly.
10x70mm Screws
IMPORTANT:
Pre-drill before fixing screws.
Example picture
2 screws per bearer per end.
36
Pre drill
hole
70mm
screw
Step 2
Parts needed - No. 54 QTY 5
No. 55 QTY 1
No. 56 QTY 1
No. 57 QTY 1
No. 58 QTY 1
Arrange the remaining framing
(
No. 54, 55, 56, 57, 58
) as shown in
the illustration.
*Ensure there is an equal amount
of space between each frame.
Secure each of the frames in place
using 2x70mm screws for each end
of each bearer, ensuring the bearers
remains level.
36x70mm Screws
IMPORTANT:
Pre-drill before fixing screws.
54
54
54
54
54
54
55
56
57
58
