P 5
Please retain product label and instructions for future reference
24
26
Pre drill
hole
70mm
screw
5
IMPORTANT:
Pre-drill before fixing screws.
Step 3
Parts Needed - No. 24 QTY 2
No. 26 QTY 2
Place the starter boards
(No. 24)
on to assembled base frame along the
longest sides and place the first two log boards
(No. 26)
in the notch as
shown.
Ensure the boards sit square on the base using the same method used
in Step 1. Measure corner to corner, making sure the measurements are
equal.
Once the boards are square, lift up the log board
(No. 26)
and fix the
starter boards in place.
Fix each of the starter boards to the frame by screwing through the
notch into the frame as shown in the illustration.
4x70mm Screws
24
26
25
26
26
29
27
Step 4
Parts Needed - No. 25 QTY 6
No. 26 QTY 10
No. 27 QTY 6
No. 29 QTY 6
Following the method shown in the
illustration, lay the first 6 boards
(
No. 25, 26, 27 & 29
)
Start by placing the front and back
boards, interlocking them with the side
boards. Then place the next side boards,
interlocking with the front and back
boards. Continue this method until you
have placed
6 boards off of the starter
boards on each side,
as shown in the
illustration.
This will create your first level.
*Ensure that the boards are level and
flush with each other as you lay each
one.
