Step 17
Attach the two turn buttons to the
slave door at the top and bottom
using 2x30mm black screws.
2x30mm Black Screws
*These turn buttons help to keep
your doors straight during high &
low levels of moisture content in
the air.
30mm
screw
Pre drill
hole
Step 19
it is recomended that after the
construction, treatment and the
removal of the protective window
cover that sealant is used to
keep the building weather tight.
Step 18
Attach a strip to the hinged side of
the middle opening doors.
*These strips allow you to adjust the
doors allowing for moisture absorbtion
and reduction.
6x30mm Screws
Pre drill
hole
SILICONE
SEALANT
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
30mm
screw
23
23
P 8
Please retain product label and instructions for future reference
