P 5
Please retain product label and instructions for future reference
IMPORTANT:
Pre-drill before fixing screws.
b
b
b
b
Place the assembled floor panels
(No.7)
upside down onto a firm and
level base. Ensure the base has suitable
drainage, free from areas where
standing water can collect.
Secure the floors together using
12x50mm screws through the floor
bearers in an alternating pattern.
Once fixed together turn the floor back
the right way up.
12x50mm Screws
Step 8
Pre drill
hole
50mm
screw
IMPORTANT:
Pre-drill before fixing screws.
Fix the Plain Panel
(No.5)
and
Small Panel
(No.2)
together by
screwing through the framing
using 6x50mm screws.
Ensure to stagger screws to avoid
colliding.
Repeat this with the second plain
and small panel but the opposite
way round, as shown in the
diagram.
12x50mm Screws
Step 9
Parts needed - No. 2 QTY 2
No. 5 QTY 2
Pre drill
hole
50mm
screw
5
2
2
5
Fix the corners of the small panel
(No.2)
and the side panel
(No.4)
with 50mm
screws as shown in the illustration.
Fix the assembled plain panels
(No.5)
together through the framing using
6x50mm
Ensure to stagger screws to avoid
colliding.
Do
not
secure the building to the floor
until the roof is fitted.
6x50mm Screws
Pre drill
hole
50mm
screw
4
5
3
5
2
2
Step 10
Parts Needed -
No.2 QTY 2
- No.3 QTY 1
- No.4 QTY 1
- No.5 QTY 2
IMPORTANT:
Pre-drill before fixing screws.
Fix the corners of the front
(No.1 and No.2) and side
panels with 50mm screws as
shown in the
illustration.
Do
not
secure the building to
the floor until the roof fitted.
9x50mm Screws
Pre drill
hole
50mm
screw
Step 11
Parts Needed -
No.1 QTY 1
- No.2 QTY 2
1
2
2
IMPORTANT:
Pre-drill before fixing screws.
Summary of Contents for 03DTSHRA1008FGC42TW-V1
Page 13: ... 2 1 3 4 ...
Page 14: ... 1 2 ...
