Mercedes-Benz S-Class 2020, Owner'S Manual

Page: 168 / 621

Operating the combination switch for the
lights
1 High beam
2 Turn signal light, right
3 Headlamp flashing
4 Turn signal light, left
#
Use the combination switch to activate the
desired function.
Switching on high beam
#
Turn the light switch to the L or Ã
position.
#
Push the combination switch in the direction
of arrow 1 .
When the high beam is activated, the indica‐
tor lamp for low beam L will be deactiva‐
ted and replaced by the indicator lamp for
high beam K .
Switching off high beam
#
Push the combination switch in the direction
of arrow 1 or pull it in the direction of arrow
3 .
Headlamp flashing
#
Pull the combination switch in the direction
of arrow 3 .
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4 .
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combi‐
nation switch beyond the point of resistance
in the direction of arrow 2 or 4 .
Vehicles with Active Lane Change Assist:
R
A turn signal indicator activated by the
driver may continue to operate for the
duration of the lane change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
Light and sight 165