Mercedes-Benz GLC 300, Operator'S Manual

Page: 158 / 462

Selecting the drive program
#
Press DYNAMIC SELECT switch 1 forwards
or backwards.
The drive program selected appears in the
multifunction display.
Configuring DYNAMIC SELECT (multimedia
system)
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Setting drive program I
#
Select Individual Configuration .
#
Select and set a category.
Switching the restoration display on or off
#
Switch Request at Start on or off.
Function on: the next time the vehicle is started
a prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an addi‐
tional prompt appears asking if the function
should remain deactivated.
% The prompt appears only if the previously
active settings deviate from the standard
settings.
Function off: the next time the vehicle is star‐
ted the A drive program is set automatically.
The ECO start/stop function is activated auto‐
matically.
% This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and Eco
start/stop setting for the previous journey
be saved for the respective user profile.
Displaying vehicle data
Multimedia system:
4
©
5
Info
#
Select Vehicle .
The vehicle data is displayed.
Displaying engine data
Multimedia system:
4
©
5
Info
#
Select Engine .
The engine data is displayed.
156 Driving and parking