Mercedes-Benz GLB 2023, Operator'S Manual

Page: 163 / 462

Configuring DYNAMIC SELECT (multimedia sys-
tem)
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Setting drive program I
#
Select Individual Configuration .
#
Select and set a category.
Switching the reset display on or off
#
Switch Request at Start on or off.
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an additional
prompt appears asking if the function should
remain deactivated.
%
The prompt only appears if the previously
active settings deviate from the standard set-
tings.
Function off: the next time the vehicle is started
the
A
drive program is set automatically. The
ECO start/stop function is activated automati-
cally.
% This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user profile.
Displaying vehicle data
Multimedia system:
4
©
5
Info
#
Select Vehicle .
The vehicle data is displayed.
Displaying engine data
Multimedia system:
4
©
5
Info
#
Select Engine .
The engine data is displayed.
%
The actual (maximum) values that can be ach-
ieved for engine output and engine torque
may deviate from the certified values within
the country-specific guidelines for permissible
tolerances (basis: UN-ECE No. 85 or country-
specific guidelines).
Influencing variables that can influence this
are, for example:
R
Sea level
R
Fuel grade
R
Outside temperature
R
Operating temperature of the engine
% The values displayed serve only as orienta-
tion. The values for engine output and engine
torque shown on the media display may devi-
ate from the actual values.
Calling up the fuel consumption indicator
Multimedia system:
4
©
5
Info
#
Select
Consumption
.
The current and average fuel consumption is
displayed.
Driving and parking 161