Mercedes-Benz GLA 250, Operator'S Manual

Page: 252 / 402

#
Do not continue driving.
#
Consult a qualified specialist workshop.
* NOTE Staining caused by leaking tire
sealant
After use, excess tire sealant may leak out
from the filling hose.
#
Therefore, place the filling hose in the
plastic bag that contained the TIREFIT
kit.
If, after ten minutes, a tire pressure of
200 kPa (2.0 bar/29 psi) has been attained:
#
Switch off the tire inflation compressor.
#
Unscrew the filling hose from the valve of the
faulty tire.
Please note that tire sealant may leak out when
unscrewing the filling hose.
& WARNING Risk of accident from driving
with sealed tires
A tire temporarily sealed with tire sealant
impairs the handling characteristics and is
not suitable for higher speeds.
#
Adapt your driving style accordingly and
drive carefully.
#
Do not exceed the maximum speed
limit with a tire that has been repaired
using tire sealant.
#
Observe the maximum permissible speed for
a tire sealed with tire sealant 50 mph
(80 km/h).
#
The sticker with details of the maximum per‐
missible speed must be affixed to the instru‐
ment cluster where it can be easily seen by
the driver.
* NOTE Staining caused by leaking tire
sealant
After use, excess tire sealant may leak out
from the filling hose.
#
Therefore, place the filling hose in the
plastic bag that contained the TIREFIT
kit.
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre‐
sponsible disposal
Tire sealant contains pollutants.
#
Have the tire sealant bottle disposed of
professionally, e.g. at an authorized
Mercedes-Benz Center.
#
Store the tire sealant bottle and the tire infla‐
tion compressor.
#
Pull away immediately.
#
Stop driving after approximately ten minutes
and check the tire pressure using the tire
inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
250 Breakdown assistance