X
Select
¯
.
X
Select
Controller setting
Controller setting
.
X
Select the desired setting.
The
#
dot indicates the current setting.
i
If the
Change station/title
Change station/title
function is
active and the navigation system is running in
the front, zooming into or out of the map is
only possible via the touchscreen.
i
In the 3D display, you can only zoom out of
the map up to a certain scale. If you zoom out
beyond this scale, the map switches to a 2D
display.
Setting the system language
X
Select
¯
.
X
Select the
Language
Language
.
A list of available languages appears.
X
Select the desired language.
The
#
dot indicates the active language.
Raising or lowering the volume of
audio sources
You can raise or lower the volume of individual
audio sources relative to the volume set on the
multimedia system. For example, you can set
traffic reports to play back louder than the cur-
rently set volume.
X
Select
¯
.
X
Select
Volume
Volume
.
X
Select the desired audio source.
A menu appears.
X
Set the desired value using the arrows.
X
Select Save
ý
.
The menu is closed.
Starting a self diagnosis
The self-diagnosis checks whether radio and
GPS signals are being received and whether all
loudspeakers are emitting sound.
X
Select
¯
.
X
Select
Self-diagnosis
Self-diagnosis
.
The diagnostics display appears.
X
Select
TEST
TEST
.
The self diagnosis starts.
Calling up version information
X
Select
¯
.
X
Select
Version info
Version info
.
Information on the software status of the mul-
timedia system is displayed.
Resetting the multimedia system
Resetting to factory settings
This function returns the settings of the multi-
media system to the factory settings. This will
delete all personal settings.
X
Select
¯
.
X
Select
Factory reset
Factory reset
.
A prompt appears asking whether you wish to
reset the multimedia system.
X
To reset: select
YES
YES
.
The multimedia system is reset to its factory
settings.
Restarting the multimedia system
In the following cases, restarting the multimedia
system may be useful:
R
if the multimedia system is not operating cor-
rectly
R
if malfunctions occur
R
if the vehicle is displayed at an incorrect loca-
tion on the map
There are two methods of restarting the multi-
media system.
Method 1: restart using the on/off knob
X
Remove any devices that may be connected
to the multimedia system.
X
Press and hold the on/off knob for five sec-
onds.
The multimedia system restarts.
Method 2: restart using the RESET button on the
front of the device
X
Remove any devices that may be connected
to the multimedia system.
X
Switch off the ignition.
X
Using a pointed object, press the RESET but-
ton on the front of the multimedia system.
The multimedia system restarts.
System settings
173
Multimedia
system
Z
