Mercedes-Benz E-Class Coupe, Operator'S Manual

Page: 382 / 486

#
Thoroughly clean off any antifreeze
from component parts before starting
the vehicle.
*
NOTE Damage caused by incorrect cool‐
ant
#
Only add coolant that has been pre‐
mixed with the required antifreeze pro‐
tection.
Further information on coolant:
R
In the Mercedes-Benz Specifications for
Operating Fluids 310.1, e.g. online at
http://bevo.mercedes-benz.com.
R
At a qualified specialist workshop.
* NOTE Overheating at high outside tem‐
peratures
If an inappropriate coolant is used, the
engine cooling system is not sufficiently pro‐
tected against overheating and corrosion at
high outside temperatures.
#
Always use coolant approved by
Mercedes-Benz.
#
Observe the instructions in the
Mercedes-Benz Specifications for Oper‐
ating Fluids 310.1.
Have the coolant regularly changed at a qualified
specialist workshop.
The proportion of corrosion inhibitor/antifreeze
concentrate in the engine cooling system should
be:
R
A minimum of 50% (antifreeze protection
down to approximately -35 °F (-37 °C)).
R
A maximum of 55% (antifreeze protection
down to -49 °F (-45 °C)).
Coolant filling capacity
Capacity
Model Capacity
All models 12.7 US qt (12.0 l)
Notes on windshield washer fluid
Observe the notes on operating fluids
(
→
page 376).
& WARNING ‑ Risk of fire and injury from
windshield washer concentrate
Windshield washer concentrate is highly
flammable. It could ignite if it comes into
contact with hot engine component parts or
the exhaust system.
#
Make sure that no windshield washer
concentrate spills out next to the filler
opening.
* NOTE Damage to the exterior lighting
due to unsuitable windshield washer fluid
Unsuitable windshield washer fluid may dam‐
age the plastic surface of the exterior light‐
ing.
#
Only use windshield washer fluid which
is also suitable for use on plastic surfa‐
ces, e.g. MB SummerFit or MB Winter‐
Fit.
380 Technical data