Mercedes-Benz E-Class Coupe 2020, Owner'S Manual

Page: 68 / 473

Observe the notes under "Suitability of
seats for attaching belt-secured child
restraint systems" (
/
page 63).
O When using a category 0/0+ baby car
seat and a category I rearward-facing
child restraint system on a rear seat:
adjust the front seat so that the seat does
not touch the child restraint system.
O You can have the head restraints of the rear
seats removed and installed by a qualified
specialist workshop. This may be necessary
for the use of certain child restraint sys‐
tems.
O The backrest of the forward-facing child
restraint system must, as far as possible, be
resting on the seat backrest of the rear
seat.
O
For certain child restraint systems in weight
category II or III, there may be restrictions
on the maximum size setting, e.g. due to
possible contact with the roof.
O The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be fitted facing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraint. Adjust
the head restraints as appropriate.
O Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
#
Install the child restraint system.
The entire base of the child restraint system
must always rest on the sitting surface of the
rear seat.
#
Always make sure that the shoulder belt
strap is correctly routed from the seat belt
outlet of the vehicle to the shoulder belt
guide on the child restraint system.
The shoulder belt strap must be routed for‐
wards and downwards from the seat belt out‐
let.
Notes on vehicles without automatic front
passenger airbag shutoff
Sticker visible when the front passenger door
is open
Vehicles without automatic front passenger air‐
bag shutoff have a special sticker affixed to the
side of the cockpit on the front passenger side.
Occupant safety 65