Mercedes-Benz E 320, Operator'S Manual

Page: 307 / 506

305
Operation
Engine compartment
Checking engine oil level with the con-
trol system
When checking the oil level
앫
the vehicle must be parked on level
ground
앫
with the engine at operating tempera-
ture, the vehicle must have been
stationary for at least five minutes with
the engine turned off
앫
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
To check the engine oil level via the multi-
function display, do the following:
왘
Switch on the ignition (
컄
page 33).
The standard display (
컄
page 145) should
appear in the multifunction display.
왘
Press button
k
or
j
, on the
steering wheel until the following
message is seen in the multifunction
display:
One of the following messages will
subsequently appear in the indicator:
앫
Engine oil level ok
앫
Add 1.0 Qt.
to reach max. oil level
(Canada: 1.0 Liter )
앫
Add 1.5 Qts.
to reach max. oil level
(Canada: 1.5 Liters )
앫
Add 2.0 Qts.
to reach max. oil level
(Canada: 2 .0 Liters )
왘
If necessary, add engine oil.
For adding engine oil, see (
컄
page 306).
For more information on engine oil, see the
“Technical data” section (
컄
page 461) and
(
컄
page 464).
Other display messages
If the SmartKey or KEYLESS-GO start/stop
button* is not in position
2 , the following
message will appear:
Switch on ignition
to check engine oil level
왘
Switch on the ignition (
컄
page 33).
If you see the message:
Observe waiting period
i
If you want to interrupt the checking
procedure, press the
k
or
j
button on the multifunction steering
wheel.