Mercedes-Benz E 320, Operator'S Manual

Page: 436 / 506

434
Practical hints
Batteries
Disconnecting the battery
왘
Depress parking brake firmly or move
gear selector lever to position
P .
왘
Turn off all electrical consumers.
왘
Remove SmartKey from starter switch.
Vehicles with KEYLESS-GO*:
왘
Press the start/stop button until
the engine shuts off.
왘
Open the driver’s door.
왘
Open the trunk.
!
Never loosen or detach battery termi-
nal clamps while the engine is running
or the SmartKey is in the starter switch.
Otherwise the alternator and other
electronic components could be se-
verely damaged.
Have the battery checked regularly by
an authorized Mercedes-Benz Center.
Refer to Maintenance Booklet for main-
tenance intervals or contact your au-
thorized Mercedes-Benz Center for
further information.
Warning!
G
Do not place metal objects on the battery as
this could result in a short circuit.
Use leak-proof battery only to avoid the risk
of acid burns in the event of an accident.
Warning!
G
The SBC brake system requires electrical
power to operate.
A malfunction in the vehicle’s power supply
or electrical system may impair brake sys-
tem operation and switch it into its emer-
gency operation mode. The same applies if
battery is disconnected. To brake, the driver
must then apply significantly greater brake
pedal pressure and depress the pedal much
further to obtain the expected braking ef-
fect. If necessary, apply full pressure to the
brake pedal. Brakes may only be applied to
the front wheels. Stopping distance is in-
creased! Adjust your driving style according-
ly. For more information, refer to “SBC brake
system” (
컄
page 90).
Warning!
G
With a disconnected battery
앫
you will no longer be able to turn the
SmartKey in the starter switch and
pressing the KEYLESS-GO* start/stop
button on the gear selector lever will
have no effect
앫
the gear selector lever will remain
locked in position
P