Mercedes-Benz COMAND MY09 Operator'S Manual Download Page 47

Page: 47 / 195

Audio

Audio operation

In chapter “Audio” you will find detailed
information regarding

radio operation

CD operation (CD drive, CD changer)

MP3 CD operation

AUX operation

If you have not done so already, please fa-
miliarize yourself with these functions by
reading chapter “At a glance”.

Press

Audio menu

Vehicle Equipment

This Operator’s manual describes all
features, standard or optional,
potentially available for your vehicle at
the time of purchase. Please be aware
that your vehicle might not be
equipped with all features described in
this manual.

General notes

Warning

In order to avoid distraction which could

lead to an accident, the driver should enter

system settings with the vehicle at a stand-

still and operate the audio system only if

permitted by road, weather and traffic con-

ditions.

Bear in mind that at a speed of just 30 mph

(approximately 50 km/h), your vehicle is co-

vering a distance of 44 feet (approximately

14 m) every second.

Opening the Audio menu

209_MY09_A_US.book Seite 46 Montag, 26. Mai 2008 6:12 18

Summary of Contents for COMAND MY09




































































































































































































Search results

Summary of Contents for COMAND MY09

Reviews:

Brands by name

Popular brands

Mercedes-Benz COMAND MY09, Operator'S Manual

Search results

Summary of Contents for COMAND MY09

Reviews:

Brands by name

Popular brands