manualshive.com logo in svg

Mercedes-Benz COMAND MY09, Operator'S Manual

Share
Download
Mercedes-Benz COMAND MY09 Operator'S Manual Download Page 39

38

At a glance

Quick reference COMAND

Speech:

Playback optimized for language 
comprehensibility.

LOGIC7 Surround:

Surround playback.

You can use different sound functions for 
the modes mentioned above.

E.g.: 
For radio operation the function

 

Standard

, for CD operation the function 

LOGIC7 Surround

.

Activating the sound functions

In any audio source operation:

Activate the main menu for the 
respective operating mode 
(

 page 31).

Press the 

Sound

 soft key.

The Sound menu will appear.

Push the joystick to 

g

 or 

G

 to 

select the desired function.

Press 

E

.

The function is activated.

i

LOGIC7 Surround sound offers a sound 
quality superior to conventional stereo 
sound. 

If the radio reception is poor, the 
system should be switched back to 
standard stereo playback. Switching 
back to standard stereo playback may 
improve audio quality.

209_MY09_A_US.book  Seite 38  Montag, 26. Mai 2008  6:12 18

Summary of Contents for COMAND MY09




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands