manualshive.com logo in svg

Mercedes-Benz COMAND MY09, Operator'S Manual

Share
Download
Mercedes-Benz COMAND MY09 Operator'S Manual Download Page 181

180

Service

SMS

Press the 

Detail

 soft key.

The list entry will appear in full in a 
window.

Line-by-line scrolling through the SMS 
Received list:

Push the joystick to 

g

 or 

G

 

 

to highlight the desired message.

Back to the Service main menu:

Press the 

Back

 soft key.

In the SMS Received (

 page 179) list, 

push the joystick to 

g

 or 

G

 to 

highlight the desired message.

Press 

E

.

The message is displayed. In the status 
bar, the name or the phone number of 
the sender will appear.

Line-by-line scrolling through the message 
text:

Push the joystick to 

g

 or 

G

.

Back to the SMS Received list:

Press the 

Back

 soft key.

Reading SMS message received

209_MY09_A_US.book  Seite 180  Montag, 26. Mai 2008  6:12 18

Summary of Contents for COMAND MY09




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands