Interior
Overall vehicle
19
Introduction to CITAN, Model Series 415
l
Passenger compartment concept
Alongside the trunk/cargo area, the passenger compartment can also be used very flexibly. This is enabled, for
example, by the split rear seats on the passenger van. All LHD vehicles are equipped with a right-hand sliding
door as standard to enable easy access to the cargo area or 3-passenger bench seat in the rear.
2-seater/5-seater
As described previously, the driver and front
passenger seats are separated from the cargo area by
a full-width partition wall installed as standard on all
panel vans.
The possible seat configurations with the folding front
passenger seat and 3-passenger bench seat are illus-
trated here.
S91.00-4511-00
S91.00-4512-00
i
Note
A 3-passenger bench seat with load protection
grille at the rear is available alternatively for the
Mixto to provide additional cargo area when
folded down.
S91.00-4513-00
S91.00-4514-00
– This printout will not be recorded by the update service. Status: 09 / 2012 –
