Mercedes-Benz C 300 2021, Operator'S Manual

Page: 326 / 502

* NOTE Damage from automatic braking
If one of the following functions is switched
on, the vehicle brakes automatically in cer‐
tain situations:
R
Active Brake Assist
R
Active Distance Assist DISTRONIC
R
HOLD function
R
Active Parking Assist
To avoid damage to the vehicle, deactivate
these systems in the following or similar sit‐
uations:
#
During towing
#
In a car wash
* NOTE Damage due to unsuitable car
wash
#
Before driving into a car wash make
sure that the car wash is suitable for
the vehicle dimensions.
#
Ensure there is sufficient ground clear‐
ance between the underbody and the
guide rails of the car wash.
#
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is sufficient.
To avoid damage to your vehicle when using a
car wash, ensure the following beforehand:
R
To avoid possible water ingress in the vehi‐
cle, it is preferable to use car washes which
allow the high-pressure pre-cleaning to be
deactivated (specification for the convertible
program).
R
Avoid any hot-wax treatment.
R
Make sure that the wind deflector on the
windshield has been retracted.
R
Active Distance Assist DISTRONIC is deacti‐
vated.
R
The HOLD function is switched off.
R
The surround view camera or the rear view
camera is switched off.
R
The side windows and soft top are closed
completely.
R
The blower for the ventilation/heating is
switched off.
R
The windshield wiper switch is in position
g .
R
The SmartKey is at a minimum distance of
10 ft (3 m) away from the vehicle. Otherwise,
the trunk lid could open unintentionally.
R
For car washes with a conveyor system:
-
Neutral i is engaged.
-
If you would like to leave the vehicle while
it is being washed, make sure the Smart‐
Key is located in the vehicle. The park
position j is otherwise automatically
engaged.
% If, after the car wash, you remove the wax
from the windshield and wiper rubbers, this
will prevent smearing and reduce wiper
noise.
324 Maintenance and care