Mercedes-Benz C 300 2021, Operator'S Manual

Page: 383 / 502

#
Position support 2 of jack 4 on jack sup‐
port point 1 .
#
Turn crank 3 clockwise until support 2
sits completely on jack support point 1 and
the base of the jack lies evenly on the
ground.
#
Turn crank 3 until the tire is raised a maxi‐
mum of 1.2 in (3 cm) from the ground.
#
Loosen and remove the wheel (
/
page 381).
Removing a wheel
Requirements:
R
The vehicle is raised (
/
page 379).
*
NOTE Mercedes-AMG vehicles
#
Observe the notes in the Supplement.
You could otherwise fail to recognize
dangers.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level
of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on
a dirty surface.
#
Unscrew the uppermost wheel bolt com‐
pletely.
#
Screw alignment bolt 1 into the thread
instead of the wheel bolt.
#
Unscrew the remaining wheel bolts com‐
pletely.
#
Remove the wheel.
#
Install the new wheel (
/
page 381).
Installing a new wheel
Requirements:
R
The wheel is removed (
/
page 381).
Wheels and tires 381