Mercedes-Benz BABY-SAFE plus II, Operating Instructions Manual

Page: 15 / 49

Installation in the vehicle
13
En
gl
ish (
U
SA)
X
4. Pull out the seat belt, guide it over the
child seat and lock the belt tongue in belt
buckle
a
.
X
5. Insert lap belt
b
in blue seat belt
guides
c
on both sides of the child seat.
Caution Do not twist the belt.
X
6. Pull on diagonal belt
d
to tighten lap
belt
b
.
Caution Make sure that belt buckle
a
is
not located in blue seat belt guide
c
or
extends so far forwards that it is in front (in
the direction of travel) of blue belt guide
c
.
X
7. Guide diagonal belt
d
behind the head
end of the child seat.
X
8. Slide diagonal belt
d
between blue
holder
e
and the child seat so that the
belt hooks into place.
Caution Do not twist the belt.
X
9. Pull on diagonal belt
d
to tighten the
belt.
X
10. Check that the child seat is installed
correctly.
X
11. If necessary, remove the child seat
from the vehicle and repeat steps 2 to 10
until the child seat is secured correctly.
X
12. Fold out D-SIP
®
f
on the side of the
vehicle door.
Note: The extended D-SIP
®
serves as
additional accident protection in the event
of a side impact. Never use it to carry or
secure the child seat.
Checklist for correct installation
For the safety of your child, check before
each journey that:
^
the child seat is installed against the
direction of travel.
^
the child seat is only attached to the front
passenger seat if no front passenger
airbag can act on the child seat.
^
the child seat is secured in the vehicle with
a 3-point seat belt as described above.
^
lap belt
b
is routed through the two blue
belt guides
c
of the child seat.
^
diagonal belt
d
is routed between blue
holder
e
and the child seat.
^
belt buckle
a
is not located in blue seat
belt guide
c
or extends so far forwards
that it is in front (in the direction of travel)
of blue belt guide
c
.
^
D-SIP
®
f
on the side of the vehicle door
is folded out.
^
the seat belt is tightened and not twisted.
10
12
11
13
14
15
10
11
13
12
14