Mercedes-Benz B-Class, Owner'S Manual

Page: 216 / 537

%
When the vehicle is switched on (the õ
display is lit in the Instrument Display), socket
ap 1 cannot be opened.
#
Press catch 7 to the le and fold open
socket cover 5 .
%
The CCS charging cable connector requires
connections 6 and 8 . Therefore, it is nec-
essary to open both parts of socket cover 5 .
#
Insert the CCS charging cable connector into
the vehicle socket to the stop.
Make sure that the charging cable is not taut
when inserted.
The
# indicator lamp 4 and status dis-
play 3 ash orange and, as soon as the high-
voltage battery is charged, green.
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charge
level display is shown in the Instrument Display
with a charging prediction. The charging predic-
tion either refers to the predicted charge level at
the set departure time, or the time at which the
high-voltage battery will be fully charged.
%
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
Ending t Ending the dir he direct curr ect current c ent char harging pr ging process (mode ocess (mode
4) 4)
RReq equir uirements: ements:
R
The distance between the key and the vehicle
does not exceed 1 m.
Combo 1 v Combo 1 vehicle socket ehicle socket
#
Press charging interruption button 3 .
The charging process is ended. The % indi-
cator lamp 1 lights up white. The vehicle
socket is unlocked.
#
Press and hold button 2 on the charging
cable connector and remove the charging
cable connector from the vehicle socket.
Driving and parking 213 213