Mercedes-Benz B-Class, Owner'S Manual

Page: 134 / 537

#
Pull rubber sections 5 and 6 over load
compartment oor 3 as shown.
#
Align luggage net 1 so that
R
rubber section 5 runs underneath
recesses 7 and beads 8 on the le and
right are placed on the lower edge of load
compartment oor 3 .
R
rubber section 6 runs above handle 4
and beads 8 on the le and right are
placed on the lower edge of load compart-
ment oor 3 .
%
Ensure that the luggage net does not block
the locking mechanism of the load compart-
ment oor.
#
Close the load compartment oor.
AAdjus djusting t ting the load com he load compar partment tment oor oor
TTo adjus o adjust t t the height he height
* NO NOTE TE Damage to the load compartment
oor
If the load compartment oor is loaded in the
upper position and the console has been
removed, the load compartment oor may be
damaged.
#
Make sure that the load compartment
oor is not loaded in the upper position
when the console is removed.
The load compartment can be made larger or
smaller depending on requirements. To this end,
you can lock the load compartment oor at two
di erent heights. The higher position provides a
at surface when the rear seat backrests are fol-
ded forward. Furthermore, you can remove a
bracket at the rear to create additional space
lengthways.
#
Li load compartment oor 1 (in the bottom
position in the example) only slightly using
handle 3 and pull it towards you.
#
Insert load compartment oor 1 into rear x-
tures 2 .
#
Fold load compartment oor down 1 .
Seats and stowing 131 131