Mercedes-Benz B-Class F-CELL, Operator'S Manual

Page: 253 / 368

X
Connect the telephone to the
COMAND system via Bluetooth
®
.
R
Ready
or name of the network provider
(if available): The telephone has found a
network and is ready for use. You can
operate it using the control system.
Answering a call
X
Press button
6
.
You have answered the call.
Ending a call or rejecting an incoming
call
X
Press button
~
.
Dialing a number from the phone book
When your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
X
Press button
U
or
V
repeatedly until
the message
TEL
appears in the
multifunction display.
X
Press button
&
or
*
repeatedly until
the desired name appears in the
multifunction display.
If you press and hold button
&
or
*
for longer than 1 second, the system
scrolls rapidly through the list of names
until you release the button again.
The stored names are displayed in
alphabetical order.
Example illustration
:
Selected name from the phone book
X
Press button
6
.
The control system dials the selected
phone number.
If the connection is successful and this
feature is supported by your network
provider, the name of the party (if stored in
your phone book) you are calling will
appear in the multifunction display.
The control system stores the dialed
number in the redial memory.
or
X Press button
~
if you do not want to
make the call.
Redialing
The control system stores the most recently
dialed phone numbers. This eliminates the
need to search through your entire phone
book.
Control system
251
Controls in detail
245_AKB; 1; 73, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-03T15:03:17+02:00 - Seite 251
Z