Mercedes-Benz B-Class F-CELL, Operator'S Manual

Page: 219 / 368

G
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint in such a way that it
is as close to the head as possible and the
center of the head restraint supports the back
of the head at eye level. This will reduce the
potential for injury to the head and neck in the
event of an accident or similar situation.
With a rear seat occupied, make sure to move
the respective head restraint up from the
lowest non-use position and have the
occupant adjust the head restraint properly.
Do not drive the vehicle without the seat head
restraints installed when the rear seats are
occupied. Head restraints are intended to
help reduce injuries during an accident.
Rear seat head restraint height
adjustment
X
Raising: Pull head restraint upward to the
desired position.
X Lowering: Press release button
:
and
push down on head restraint.
Rear seat head restraint fore and aft
adjustment
X
Adjust the head restraint to the desired
position by pushing or pulling on the lower
edge of the head restraint cushion.
Rear seat head restraints, removing
and installing
X
Removing: Unlock the rear seat backrest
and fold it slightly forward (
Y
page 264).
X
Pull head restraint to its highest position.
X Press release button
:
and pull out head
restraint.
X
Installing: Insert head restraint so that its
front side is facing the direction of travel.
X
Push head restraint down until it engages.
X Press release button
:
and adjust head
restraint to desired position.
Seats
217
Controls in detail
245_AKB; 1; 73, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-03T15:03:17+02:00 - Seite 217
Z