X
To switch on: turn the light switch to
T
.
The green
T
indicator lamp in the instru-
ment cluster lights up.
Standing lamps
Switching on the standing lamps ensures the
corresponding side of the vehicle is illumina-
ted.
X
To switch on the standing lamps: the
SmartKey should not be in the ignition lock
or it should be in position 0.
X
Turn the light switch to
W
(left-hand side
of the vehicle) or
X
(right-hand side of
the vehicle).
Combination switch
Turn signal
:
High-beam headlamps
;
Turn signal, right
=
High-beam flasher
?
Turn signal, left
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow
;
or
?
.
The corresponding turn signal flashes three
times.
X
To indicate: press the combination switch
beyond the pressure point in the direction
of arrow
;
or
?
.
High-beam headlamps
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or switch on the ignition.
X
Turn the light switch to
L
or
Ã
.
X
Press the combination switch beyond the
pressure point in the direction of arrow
:
.
In the
Ã
position, the high-beam head-
lamps are only switched on when it is dark
and the ignition is on.
The blue
K
indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
X
To switch off the high-beam head-
lamps: move the combination switch back
to its normal position.
The blue
K
indicator lamp in the instru-
ment cluster goes out.
High-beam flasher
X
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2, or switch on
the ignition.
X
Pull the combination switch in the direction
of arrow
=
.
Hazard warning lamps
100
Exterior lighting
Li
ghts
and
wind
sh
ield
wip
er
s
Summary of Contents for B-Class Electric Drive W245
